Home Categories Send inquiry

Solvent-Based TPU adhesive good viscosity

about TPU

TPU(thermoplastic polyurethanes) bridges the material gap between rubbers and plastics. Its range of physical properties enables TPU to be used as both a hard rubber and a soft engineering thermoplastic.TPU have achieved widespread usage and popularity in thousands of products, owing to their durability, softness and colorability among other benefits. In addition, they are easy to process.

As an emerging high-tech and environment-friendly materials, TPU has many excellent properties like wide hardness range, high mechanical strength, outstanding cold resistance, good processing performance, environmentally friendly degradation, oil resistance, water resistance and mold resistance.

Application

Applications: Solvent Adhesives, Hot-melt Adhesive Films, Footwear Adhesive.

Parameters

Properties

 Standard

Unit

D7601

D7602 D7603 D7604

Density

ASTM D792 g/cms 1.20 1.20 1.20 1.20

Hardness

ASTM D2240 Shore A/D 95/ 95/ 95/ 95/

Tensile Strength

ASTM D412 MPa 35 35 40 40

Elongation

ASTM D412 % 550 550 600 600

Viscosity (15%inMEK.25C)

SO3219 Cps 2000+/-300 3000+/-400 800-1500 1500-2000

MnimmActition

-- °C 55-65 55-65 55-65 55-65

Crystallization Rate

--

--

Fast

Fast

Fast

Fast

The above values are shown as typical values and should not be used as specifications.

Package

25KG/bag, 1000KG/pallet or 1500KG/pallet, processed plastic pallet

Handling and Storage

1. Avoid breathing thermal processing fumes and vapors

2. Mechanical handling equipment can cause formation of dust. Avoid breathing dust.

3. Use proper grounding techniques when handling this product to avoid electrostatic charges

4. Pellets on the floor may be slippery and cause falls

Storage recommendations: To maintain product quality, store product in a cool, dry area. Keep in a tightly sealed container.

Notes

1. Deteriorated TPU materials cannot be used to process products.

2. Before molding, it is necessary to fully dry, especially during extrusion molding, blow molding, and film blowing molding, with stricter requirements for moisture content, especially in humid seasons and high humidity areas.

3. During production, the structure, compression ratio, groove depth, and aspect ratio L/D of the screw should be considered based on the characteristics of the material. Injection molding screws are used for injection molding, and extrusion screws are used for extrusion.

4. Based on the fluidity of the material, consider the mold structure, size of the glue inlet, nozzle size, flow channel structure, and position of the exhaust port.

Certifications


Solvent-Based TPU adhesive good viscosity Related Video: